New application builds a custom application together with its object types. Work through one page with four steps, then review and install everything at once. Nothing is saved until you click Create application on the last step.

Prerequisites

Warning

Your work stays in the browser tab until you finish; nothing is stored on the server before that. Leaving the page asks Discard this wizard?, while reloading or closing the tab triggers the browser’s own warning instead. Either one discards your work.

Open the New application page

In the top navigation, click the arrow next to Create and select New application. The Create application page opens with four steps:

  1. Application details
  2. Object types
  3. Capabilities
  4. Review & create
Tip

Steps never block you. Continue with a step half filled in and come back later or click any step to jump to it. Each step shows how many issues remain, and Review & create lists every issue with a Fix link that opens the exact object type and tab.

Application details

The step sets the application’s identity and look. A live tile preview, Preview of the application tile, shows the icon, color, name, and shortcut as you change them.

FieldWhat you set
NameRequired. The application’s name. It must not contain a slash (/).
ShortcutDerived from the name and shown on the application tile. Edit it if needed.
DescriptionShown on the application overview page. You can refine it later.
IconPick an icon from the picker, which shows the application icons first, then Object type icons, then the extended icon library (the same library spaces use). Or click Upload SVG to use your own. See Upload a custom icon. To clear the icon, click Remove icon, or click the selected icon again.
ColorRequired. Used for the application tile and accents across the app. Pick a color from the palette, or enter a Custom color as #RRGGBB. The palette offers only colors that belong to a package. When you edit an existing application, its current color stays selectable even if the palette doesn’t include it.

Upload a custom icon

When no library icon fits, click Upload SVG and select your own icon file. Dawiso checks it right away: an accepted icon appears next to the Icon label, a rejected one shows why underneath. For what to do about a specific rejection, see Troubleshooting.

The icon must be a square SVG of at most 64 KB, holding only drawing content; no scripts, embedded images or text, <style>/<metadata> elements, editor-specific metadata (such as Inkscape’s sodipodi:*), or links to anything outside the file.

Tip

A plain SVG export from Figma usually passes. Exports from Illustrator or Inkscape often need editor metadata or <style> blocks removed; the rejection message names what to remove.

Picking a library icon later replaces the uploaded one. After installation, the uploaded icon becomes an ordinary icon in the icon library that everyone can pick.

Add object types

Add as many object types as the application needs, for example, a term or a domain.

The step has a list of object types on the left and the selected type on the right. Each list row shows the icon, the name, and a second line such as “3 attributes · 2 relations”. A row also shows how many issues the type has.

  1. Click + Add object type at the bottom of the list. A new type named New object type is selected.
  2. Work through its tabs on the right. A tab with an issue is marked with an orange circle:
    • Basics: Fill in the name and description, and pick the icon.
    • Attributes: Pick standard attributes from a list, and add custom attributes inline in a table (there is no separate dialog).
    • Relations: Select the object types this type links to; each selection uses the default relation. Click the relation chip to pick another one or create a new one.
    • Structure: Set only where objects sit in the tree. Relations are no longer set there.
    • Governance: Assign ownership and classification.
    • Behavior: Define how objects of this type are created, drafted, and found.
    • Page layout: Preview the generated object page, based on what you set in the other tabs. You can customize the layout later.

For full detail on every tab, see New object type.

Tip

Select an object type and use the icons in its row or in the header on the right to:

  • Duplicate it. The copy shares the original’s custom attributes.
  • Delete it. Deleting a type that others relied on as a parent or relation target removes those references too; Review & create lists them. Click Undo in the toast to bring it back.

Configure capabilities

Turn on application settings that decide what users can do with the application’s objects. Recommended capabilities are on by default and tagged Recommended:

  • Excel export
  • Excel import
  • Keyword search of authored content
  • Full-text search of authored content
  • Comments

Comments is a normal capability. It is on by default, and the object pages then show a comment section.

  • Search all capabilities: One search field matches names and descriptions, highlighting hits and showing the count, for example “6 of 24”. Without a search, it shows how many capabilities are on; a search with no matches shows “No capabilities match ‘‹query›’.”
  • Main capabilities: Grouped first, under headings such as Search, Import & export, and Collaboration & history.
  • Advanced settings: Collapsed by default, showing how many are on. It opens automatically when your search matches something inside it.

Review & create

The step shows the whole definition before anything is created.

  1. Check the three summary cards (Application details, Object types, and Capabilities), each with an Edit link that jumps back to fix something.
  2. Read What will be created:
    • The application, with an overview page and a default page layout.
    • Every object type you defined, each with a generated object page you can customize later via its Page layout tab.
    • A configuration package holding the whole definition, listed in Settings > Packages > Resources.
  3. Click Create application.

If there are issues, each one appears as a line with a Fix link that opens the exact object type and tab that owns the problem. The list also reports a selected value whose text has no translation, before anything is saved.

Tip

Application creation is disabled until all issues are fixed.

Installation progress follows and ends with Open application. See Installation status.

Installation

Installation status

After you click Create application, Dawiso installs the application’s configuration package. The review screen shows the progress.

StatusWhat you seeWhat you can do
Installing”Creating application ‹name›… This can take a few minutes. Keep this page open until it finishes.”Wait.
Installed”Application ‹name› was created.”Click Open application, Add application to space, or Close wizard.
Installed with warnings”Application ‹name› was created.” and Installed with warnings with the list of warnings.Click Open application, Add application to space, or Close wizard.
Installed, tab not up to date”Everything was installed, but this browser tab is still catching up. If a new page or name is missing, reload the tab in a moment.”Click Open application, Add application to space, or Close wizard. Reload the tab if a page or name is missing.
Failed”The application could not be installed.” with the reported issues and the package name.Click Open Settings › Packages to inspect the package, or Back to editing to correct the definition.
Installed, but not found”The application could not be installed.” with “The package was installed, but the new item could not be found in it.” and the package name.Click Open Settings › Packages to inspect the package, or Back to editing to correct the definition.
Taking too long”Installation is taking longer than expected. Check Settings › Packages for the package ‹package›.”Click Open Settings › Packages or Back to editing.
Status unreachable”The installation status of the package ‹package› cannot be reached right now. Check your connection and try again.”Click Check again, Open Settings › Packages, or Back to editing.

Back to editing keeps everything you entered, so you can correct it and try again. If you reload the page while the installation is running, it shows the installation status again.

A failed installation doesn’t block the name or the package. When you create the application again, Dawiso replaces the failed draft version and installs the new one. A draft whose installation is still running, or a draft that was created in Settings > Packages and never installed, still blocks the name. See Troubleshooting.

Add the application to a space

A new application isn’t in any space yet. Add application to space opens the application’s overview page with the Add application to space dialog: select the space and the workflow, and the application opens in that space. Closing the dialog leaves you on the overview page. Close wizard returns to the home page.

To change the application later, open it with Edit application.

Troubleshooting

Name and color

MessageWhat to do
”Enter a name for the application.”Enter a name on the Application details step.
”The name must not contain a slash (/).”Remove the slash from the name.
”Pick a color.”Pick a color from the palette, or enter a custom color.
”Enter the color as #RRGGBB.”Enter a hash followed by six hexadecimal digits, for example #E57E3B.

Icon upload

MessageWhat to do
”The file is larger than 64 KB.”Reduce the file to 64 KB or less, and upload it again.
”The file is not an SVG image.”Upload the icon as an SVG file.
”The file is not well-formed SVG.”Fix the SVG markup, or export the icon again. A comment that contains markup also causes this message.
”The SVG has no viewBox.”Add a square viewBox to the icon, for example 0 0 24 24.
”The icon must be square (equal viewBox width and height).”Make the icon square, so that its viewBox width equals its height.
”The SVG contains a disallowed element: ‹name›.”Remove the named element from the file. For what is allowed, see Upload a custom icon.
”The SVG contains a disallowed attribute: ‹name›.”Remove the named attribute, or remove the named property from the style attribute.
”The SVG references external content: ‹name›.”Remove the named reference. Links in the icon can point only to elements inside the same file.
”The icon could not be checked. Try again.”Click Upload SVG and select the file again.
”The icon is not a valid SVG.”Check the file against the rules in Upload a custom icon, and upload it again.
”The uploaded icon is not a valid SVG.”Appears when you create the application. On the Application details step or an object type’s Basics tab, upload a valid icon or pick a library icon.

Creating the application

MessageWhat to do
”An application with this name already exists. Choose a different name.”Rename the application on the Application details step.
”The text ‹translation key› has no translation. Choose another value, or add the translation in Settings › Translations.”Appears on the Review & create step. Click Fix to open the object type and tab and choose another value, or add the translation in Settings > Translations.
”A draft version of this configuration package is still being installed or is waiting in Settings › Packages. Wait for the installation to finish, or install or discard the draft there.”Wait for the installation to finish. Otherwise install or discard the draft in Settings > Packages > Resources, then create the application again.